22nd July 2014 09:30 - 17:00
Zienkiewicz Lecture Theatre - Swansea University
This workshop is intended as a forum for industry and academia to present their interests, expertise and resources in new materials, printing and device integration, in order to promote discussion of research ideas, funding applications and industrial collaboration among stakeholders with similar interests.
A targeted theme of WIN-IPT workshop is Innovative printing technologies and device integration. Although the workshop is intended and designed to have a far wider remit and appeal. The focus will be on the new materials, manufacture by printing and new applications, printed electronics and integration of electronic devices into low-cost ubiquitous products such as "smart products". The workshop will offer the opportunity of networking with numerous academic experts and industry representatives. Participants will be treated to new research findings and information that will benefit both industry and the research community. The afternoon session will be focused on future funding opportunities and all attendees are invited to deliver a five minute presentation on their areas of interest and possible collaboration.
There is no cost for attending.
We look forward to meeting you in Swansea!
This event is hosted by WIN-IPT at The Welsh Centre for Printing and Coating, Swansea University. Please contact Tatyana Korochkina, if you would like more information. Email: firstname.lastname@example.org
WIN-IPT is part-funded by the European Regional Development Fund (ERDF) through the Ireland Wales Programme INTERREG 4A
|09:30 - 10:00||Registration & Coffee|
|10:00 - 10:10||Introduction to WIN-IPT,
|10:10 - 10:35||Autarkic Sensors through Smart Integration,
|10:35 - 11:00||Lifetime and reliability testing in Organic solar cells,
|11:00 - 11:20||Coffee and Networking Session|
|11:20 - 11:45||Integration of flexible, large area, printed electronics and silicone technology,
|11:45 - 12:10||Additive printing of structural dynamic systems with 3D integrated electronics,
|12:10 - 12:35||A fully printed interposer solution to the cost conundrum for 3D packaging,
|12:35 - 13:35||Lunch and Networking Session|
|13:35 - 13:50||Commercial functionalisation and exploitation of graphenes,
|13:50 - 14:05||Printing microneedles on flexible substrates,
|14:05 - 14:30||Low-cost, solution processible carbon nanotube supercapacitors and their characterization,
|14:30 - 14:55||Nanohole Technology on Fibre-Optic Face Plate,
|14:55 - 15:15||Coffee and Networking Session|
|15:15 - 17:00||Round table discussion of future funding opportunities and possible collaboration|
|17:00||Meeting Close / Coffee and Networking Session|
Singleton Park, Swansea, SA2 8PP